Volcano Fine Lavatube User Manual Download Page 23

Page: 23 / 23

ENVIRONMENT

SUPPORT

Informal handling of waste electrical and electronic equipment (WEEE) has potential negative
effects on the environment and human health as a result of the presence of hazardous substances
in electrical andelectronic equipment.

The crossed out waste bin symbol indicates that this product is electrical and/or

electronic equipment waste (WEEE) and should not be treated as household waste.

Instead this product should be separated and disposed of through the established

municipal collection point for recycling of electrical and electronic equipment.

For additional support with your VOLCANO Fine Electronic Cigarettes® products:

TOLL FREE: 1-800-870-3357
E-MAIL: [email protected]

Browse our user forums to connect with other VOLCANO eCig users for tips, tricks and more at:
http://www.volcanoecigs.com/forum

Summary of Contents for Lavatube
























Search results

Summary of Contents for Lavatube

Reviews:

Related manuals for Lavatube

Brands by name

Popular brands

Volcano Fine Lavatube, User Manual

Search results

Summary of Contents for Lavatube

Reviews:

Related manuals for Lavatube

Brands by name

Popular brands