Installing the Flight Battery
Dual Rate
Transmitter
A: Throttle
B: Dual Rate
C: Antenna
D: Speaker
E: LED
F: Steering
G: Steering Trim
H: Power Switch
1. Make sure the throttle is in the off position and turn on the transmitter.
2. Open the battery hatch on the bottom of the airplane and plug in the flight battery.
3. Install the flight battery into the airplane as shown and close the hatch.
Note: Keep your airplane at a horizontal level when you power it on. This will allow the
airplane to calibrate the gyro system. You can place your airplane either facing up or
upside down to turn on power switch easier. The key is to keep it left-and-right-balanced.
Press dual rate button up/down to gain larger/smaller
steering angle.
4 / 8
