13 / 16
Disconnect the battery and remove it from the airplane. Then, turn off the transmitter. Allow the battery to cool
airplane to make sure nothing has become loose or damaged.
Make sure
that the airplane initiates an ascending glide path. If necessary, add power to extend the glide path
to reach control the glide path and altitude.
Continue to apply elevator until the mode l touches down at which time you should be holding full, or nearly full
up elevator. This will cause the airplane to slow and settle to the ground.
CAUTION: If, during a rough landing, the propeller becomes jammed and cannot rotate, the battery and
speed control will become very hot if you attempt to add power .
Immediately move the throttle down to stop the motor. If you fail to do this, the motor, speed control
and /or battery will be damaged.
l
Landing
After Flight
Charging Instruction
For charging the included lithium battery, you can only use the included charger set(balance charger and
power supply), or a suitably compatible lithium battery charger.
Charging the lithium battery using a none lithium battery compatible charger (such as a NiCd or NiMH
battery charger), or even a different lithium battery charger with the incorrect settings, may result in damage
to the battery or even fire resulting in property damage and/or personal injury.
Follow below steps to charge the lithium battery with the included charger.
1. Plug the included balance charger to the power adaptor, then plug the power adaptor into a compatible
AC outlet(depends on different contries and area) , then connect the power output lead to the receptacle
on the side of the balance charger The power adapter and balance charger are powered on when the
green color LED indicator is glowing.
Lithium Battery
Balance Charger
Power
Adaptor