VOKKERO GUARDIAN EUROPE Audio Pro - User Guide V1.0.0
42
Page
/ 80
GB
3.3. Connecting a headset
Several types of headsets from the VOKKERO range can be connected to VOKKERO Guardian. The headset is automati-cally
detected by the terminal when the headset is plugged in.
3.3.1.
Plugging in a headset
Plug the headset into the slot at the top of
the product, beside the LCD.
Line up the 2 red marks of the product and
the connector
Note:
Do not force the headset; it should connect
easily; if this is not the case, check the head-
set to make sure it isn’t dam-aged.
Attention
Do not attempt to remove the head-
set by pulling the cable.
Attention
Do not turn the connector
Use the “Micro” icon on the terminal screen to make sure that the headset is properly connected.
No accessory connected
Accessory connected
3.3.2.
Removing the headset
To remove the headset
• Firstly, pull on the ring of the headset to release the connector switch.
• Then remove the headset connector
