The period values are pre-set by default:
To select:
- Push the Days key repeatedly.
- Select the desired time option.
- Push the period key.
- The “P” and “1” values start blinking.
- The P1 period is activated.
To change:
- Push the Start period key.
- 6:00 AM starts blinking.
- Activate the arrow keys.
- Select the desired value.
- Push the Start period key to change parameter.
- Repeat the change operations.
- Push the OK key to confirm.
The end of period value corresponds to the start or period one for the
next period.
To check:
- Push the Days key.
- Select the time option.
- Push the period key.
- Check the set times.
- Push the period key to proceed.
If the settings are incorrect:
- “--” is displayed on screen.
- The triangular icons are turned on.
If the settings are correct:
- Push the OK key to confirm.
Programming
The time slots can be associated with:
The functions:
indoor
outdoor
night
The unit’s setting modes:
ON/OFF
Frequency reduction ON/OFF.
To match:
- Set the time slot as shown in the relevant chapter
- Push the desired Touch’n’Go key.
- The triangular icon above the key starts blinking.
- Push the Zone key.
If the unit’s status is ON, you are choosing to turn the heat pump OFF
during the P1 period
If the unit’s status is OFF, you are choosing to turn the heat pump ON
during the P1 period
- Push the Maintain key.
If the unit’s status is ON, you are choosing to turn the frequency
reduction mode “OFF”
If the unit’s status is OFF, you are choosing to turn the frequency
reduction mode “ON”
To go to the second period:
- Press the Period key twice
- P2 starts blinking
- Repeat the settings
To check:
- Push the Days key.
- Select the time option.
- Push the Period key.
- Check the set times.
- Push the Period key to proceed.
If the settings are incorrect:
- “--” is displayed on screen.
Functions
Setting the current date and time.
Upon first use of the machine, it is necessary to set the current date and
time.
Push the D/H/M SET TIME key.
The selected parameter starts blinking.
Push the D/H/M SET TIME key to change parameter.
Activate the arrow keys.
Set the current value.
Push the OK key to confirm.
Setting of room temperature
- Push the mode key.
- Select the desired operation mode.
- Activate the arrow keys.
- Set the desired temperature.
- The temperature value is stored until the next programmed period.
- The icon for the timer programme blinks.
- Push the lock key.
- The set temperature shall be maintained until the user presses the lock
key again.
Keyboard lock
To lock:
- Push the Days, Period and Period Start keys concurrently for 3
seconds.
- All keys shall be disabled.
- The keyboard locked icon is displayed.
To unblock:
- Push the Days, Period and Period Start keys concurrently for 3
seconds.
Touch’n’Go functions
The Touch’n’Go functions make it possible to access simplified
programming options.
The functions values are pre-set by default on typical temperatures and
periods, different for heating and cooling.
Available functions and pre-set values:
To select:
- Push the key for the desired function.
- Push the Lock key to keep the home at one of three comfort levels
indefinitely.
To change:
- Push the key for the desired function for 3 seconds.
- The set temperature starts blinking.
- The heat or cool symbol starts blinking
- Activate the arrow keys.
- Set the desired temperature.
- The triangular icon above the key starts blinking.
To change mode:
- Push the mode key.
- Select the desired operation mode.
- Repeat the change operations.
- Push the OK key to confirm.
Reset
- Press the At home and Away keys concurrently for 10 seconds to enter
the user configuration mode.
- The number 999 is displayed in the Temperature area of the screen.
- The number 10 is displayed in the Time area of the screen.
- Activate the arrow keys.
- Set the value “0”.
- The temperature “Fd” abbreviation is displayed in the Temperature area
of the screen.
- Reset is activated.
- The Control panel is reset to the default values.
Time slots.
The Control panel can hold up to six time slots, called periods, identified
on the display as P1, P2, P3, P4, P5 and P6.
Function
Heating
Cooling
Indoor
20° C
24° C
Outdoor
15° C
28° C
Night
18° C
26° C
Period
Start time
P1
6:00 AM
P2
8:00 AM
P3
17:00 PM
P4
22:00 PM
P5
22:00 PM
P6
00:00 AM
26
