Instruction Manual
Voith Turbo
Way Valve WSR-D16212
2003 / 07 aie
Voith Turbo GmbH & Co. KG
Page: 11 / 24
918 3626 018870 en
D – 74564 Crailsheim
Version: 3.0
Function of manual operation knob:
Instead of the magnetic force F
Mag
, a force can be set that is transmitted to the control
piston via the tappet.
This way, the control piston can be moved without electric connection and to connect
output A with P or T.
Thus, the piston rod on a cylinder connected on output A can be moved to the
corresponding final position. It is not possible to set to any position s.
4
Packing, Storage and Transportation
Packaging
The way valve is supplied in special packaging. All hydraulic connection openings are
sealed with protective plugs.
Storage and preservation
A galvanic corrosion protection will be applied to the outer surfaces of the way valve. On
delivery, the inner parts of the way valve which are not surface-coated are moistened with
preservation oil.
Within Europe, this preservation is sufficient as corrosion protection for about 8
months, provided the way valve is stored in a dry location.
If it is intended to store the way valve for a longer period of time, special precautions have
to be taken. Coordinate such precautions for each individual case with Voith Turbo GmbH
& Co. KG, Crailsheim.
The ambient conditions for storage must be within the limits indicated in Chapter 1.
Transportation
It is not allowed to transport the way valve in an explosive atmosphere! This also
applies to the transportation of spare parts!
Improper transportation or lifting of the way valve may cause damage to property and
personal injuries.
Observe, in particular, that constraining forces do not act on the cable entry of the
control magnet (VRM) and that the connecting line is not damaged.
For transportation purposes, it is not allowed to keep the way valve connected to the
connecting line.
Summary of Contents for WSR-D16212
Page 25: ......
