19
VoiSmart
®
IP Telephony & VoIP Solutions
* You can get the account information (username, password, server sip, etc) from your
service provider.
** If you do not have a display name, you can use phone number as your display
name.
Make Calls
Press key or Pick up the handset, dial the number, then press the
#
key to dial out.
Method 2: Configuring by Web page
The Phone is set as bridge by default, therefore the LAN port works as switch 10/100 Mbit/s
allowing to share the Network connection on the WAN Port.
The Phone is set in DHCP mode by default.
Login the Webpage
1.
connect WAN port of the phone to home / office network (if available)
2.
connect the PC to LAN port of the phone
3.
if DHCP server is available, please check the IP address of phone using
key.
4.
if DHCP server is not available, see section “Configuring by Browser”
5.
open web browser and input the Phone address, on the phone , es.
6.
enter the account and password (default account and password are admin).
7.
select tab Account
8.
register accounts selecting Account1, Account 2, Account 3, etc. This phone can
support 6 accounts.
You can get the account information from your service
provider.
9.
press Confirm button to save the settings.
10.
wait a moment for registering to the server, then return to the Account page to
check the register status. If it displays “Registered”, you can make calls now.