NT-3010-01-16POE
16-PORT 10/100M POE SWITCH
Quick Installation Guide
FCC Warning
This device has been tested and found to comply
with limits for a Class A digital device, pursuant to
Part 15 of FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment. This
equipment
generates
and
radiates
radio
frequency energy and, if not installed and used in
accordance with the user’s manual, it may cause
interference in which case users will be required
to correct interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This switch provides 16 10/100M ports. It is
designed
for
easy
installation
and
high
performance in an environment where traffic is on
the network and the number of users increases
continuously.
It consists of 16 PSE/PoE ports. This can solve
the limitation of the power outlet location and offer
the system designer a flexible solution to locate
the network device everywhere
.
The rack-mount size was specifically designed for
medium to large workgroups. The Switch can be
installed where space is limited; moreover it
provides smooth network migration and easy to
upgrade the network capacity. The 19” size can
be rack-mount on 19” cabinet.
Package Contents
Before you start to install this switch, please
verify your package that contains the following
items:
One PoE Web Smart Switch
One Power Cord
19” Rack Mount Kit
Note: If any of these items is found missing or
damaged, please contact your local supplier
for replacement.
Key Features
16 Port 10/100M Nway (Auto-negotiation)
Web Smart Switch
16 PSE/PoE function ports
Supporting the power Max. 15.4 W for each
PSE/PoE port (Total Power: 130W)
483mm (19”) rack-mount size
Auto-learn of networking configurations
Auto-detect full/half-duplex modes for any
port
Dedicated full-duplex 200Mbps bandwidth
Store-and-Forward switching methods
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
Non-blocking & Non-head-of-line blocking
full wire speed forwarding
Auto-MDI/MDI-X function for any port
Smart plug & play
Front Panel (LEDs)
LED
Status
Description
On
Power is on
Power
Off
Power is off
On
Connection established
Off
No connection
LINK/ACT
Flashing Data is transmitting or
receiving
On
Port is linked to Power
Device
PoE
Off
No Power Device is
connected
Connections
Switch/Hub to this 16 Port PoE Fast
Ethernet Switch
This switch provides automatic crossover
detection functionality for any port. It is
simple and friendly to up-link to another
switch without crossover cable.
