VoIP Wireless Router User’s Manual
76
Enable Virtual Server:
Check the box to enable port forwarding.
WAN Port Range:
Enter the port range for the WAN side.
TCP/UDP:
Select the communication protocols used by the server,
TCP
,
UDP
or
Both
.
LAN Host IP Address:
Enter the IP address of the device that provides various services.
Server Port Range:
Enter the port range used by the LAN host.
Remark:
Enter comments
2-5-17 Emergency No
Emergency numbers is defined here. You can call out to PSTN (Telco line) with the numbers that your VSP
does not support (i.e. Toll free service numbers).
Advanced Settings
→
UPnP
Enable:
Tick the check box to make this entry effective.
Scan Code:
Fill in the leading number for the VoIP Router to scan or the full number.
User Dial Length:
Set the total digit count of user dialed.
2-5-18 UPnP
Advanced Settings
→
UPnP
Enable UPnP Server:
UPnP is a network standard, enables the auto discovery the devices on the network.
It only works with the device that supports UPnP
