VoIP Wireless Router User’s Manual
36
General Settings
→
Line settings
Ring (Early Media) Time Limit[10 - 600secs]:
Enter the timeout to cancel a call if no one answers the
phone.
Enable End of Digit Tone:
Check the box to activate the function of playing a “Beep-Beep” tone to notify
the user that the call is in progress.
Force Calling Thru PSTN code:
Enter the code to get a PSTN line before dialing out. For example: If you
specify code “33” in this option and would like dial “23456789” via a PSTN line: Dial “33” and you will hear
dial tone from the PSTN line, now you’re able to dial “23456789” via PSTN line.
Early Media Treatment:
Check the box to send the one-way RTP immediately when a connection with a
VoIP service provider has been set up.
Loop Current Drop Trigger Time:
Enter the time to avoid the line being engaged when FXS port is
connected to PBX. It stops the loop current from FXS port when FXS port is playing busy tone. The setting
“0” zero is to disable this function.
Loop Current Drop Duration:
Enter the drop duration for loop current.
ROH Begin Time:
As users forget hang up phone set it makes FXS play loud Howler Tone to notify users
put hand set correctly. If this timer is set to be 20 seconds, that FXS play busy tone for 20 seconds then
play ROH.
ROH Duration:
It is the maximum time for FXS play ROH, then FXS will stop play ROH and keep silence.
FXS Ring Voltage:
It is to set the Ring Voltage of FXS.
FXS Onhook Voltage:
It is to set the Onhook Voltage of FXS.
Detect FXO Line Presence:
Tick the check box to detect the line presence that FXO port is connected to
PBX or a PSTN line. Untick the check box to disable this function if it mis-detects line presence on FXO port
