background image

8

6. While the icemaker is on, check water level periodically. If water pump can’t inject water, 

the ice maker will stop automatically, and the “ADD WATER” indicator will be on.  

Press the “ON/OFF” button, fill water up to the level mark and press “ON/OFF” again.

Allow 3 minutes for the refrigerant to settle before restarting.

7. The ice maker automatically stops working when the ice basket is full and the “ICE FULL” 

indicator will be illuminated. Warning: Direct sunlight or sunlight reflection may cause infared 

sensor malfunction. If the unit does not stop, even ice cubes can obstruct sensor, move the 

unit where there is no sunlight.

8. Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level.

If unit is not in use, drain all water in the tank reservoir.

TROUBLESHOOTING

 

PROBLEM

POSSIBLE CAUSE

SOLUTION

"ADD WATER" 

indicator is on.

Lack of water.

Stop the ice maker, fill water, and 
press "ON/OFF" button again to 
restart the unit.

 "ICE FULL" 

indicator is on.

Remove ice from ice basket.

Ice basket is full.

No ice, but "ICE FULL"

indicator is illuminated. 

1. Ice-Full sensor 

(transmitter and 

receiver) is covered 

by the impurities 

contained in water or 

other pollutants.

2. Ice-Full sensor is 

malfunctioning.

Use a soft cloth dip into water to 
clean the Ice-Full sensor. After 
cleaning, to see if the ice maker 
resume working, otherwise, 
please consult a certified 
technician.

Summary of Contents for 357120













Reviews: