TVS 3690/3695 - English
10
Step 2:
Install the floor stand
For this step you will need:
l
1x
Wooden/steel stand
Ⓡ
l
1x
Left foot
Ⓢ
l
1x
Right foot
(with pre-attached bolts)
Ⓣ
l
2x
M8*20mm bolts
Ⓜ
l
1x
Cover plate
Ⓟ
l
1x
Allen key
Ⓞ
1.
Slide the
right foot
(with pre-attached bolts)
Ⓣ
into the
wooden/steel stand
Ⓡ
. Make sure the
longer leg is at the front of the
wooden/steel stand
Ⓡ
. The back of the
wooden/steel stand
Ⓡ
includes a hidden notch for cable management.
2.
Use the
allen key
Ⓞ
to attach the
left foot
Ⓢ
(without pre-attached bolts) to the
wooden/steel
stand
Ⓡ
by screwing the two
M8*20mm bolts
Ⓜ
into the pre-attached screws of the
right foot
Ⓣ
.
