PFW 6875
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
www.vogels.com | Europe +31 (0)40 26 47 400
10
9
8
11
Two people recommended for this step; one person to level the
mount and another person to mark the mounting locations.
Drill a “pilot hole” in each of the four (4) mark areas with a M8 or
5/16” concrete drill bit.
1) Place the mount against the wall over the threaded shafts of the
concrete wedge anchors.
2) Attach the nuts and washers you remove and add (1) 5/16”
washers on each threaded shafts.
3) Tighten using a socket wrench and a 10mm socket.
Do not over tighten the concrete wedge anchor
1) Insert the concrete wedge anchors into each hole. Lightly tap
each concrete wedge anchors into place with a hammer.
2) Remove the nuts and washers from the concrete wedge anchors.
Concrete Wall Installation
5/16” Washer
Page 5
