·
-
.
·
.
·
,
.
·
.
Replace for new split pin when re assembly
Repeatedly press and release the brake pedal for clearly feeling the pressure point
In case the pressure point could not be felt ask and contact the VOGE authorized distributor
Incorrect adjustment makes the brake pads and plate always under stress which lead
to damage
!
Danger
The adjustment for rear brake pedal
·
,
,
,
.
·
,
-
,
,
:
–
–
–
–
–
,
.
–
.
–
-
.
Keep the height of rear brake pedal at a suitable position
if is too high it may step by mistake in using which leads
to friction between brake pads and plate and makes them
damage
For ensuring the brake reliability the free travel of rear
brake pedal shall be within 25 35mm in case it is incorrect
adjust as below
Remove the split pin 1
Remove the pin axis 2
Loosen the nut 3 on adjusting stud
Turn clockwise or anticlockwise the connecting part 4 on
adjusting stud
Turn it clockwise the height of brake pedal may rise or turn anticlockwise it may fall down
Lock up the nut of adjusting rod when the brake pedal adjusted to the suitable height
Re assembly is completely opposite to disassembly
The free travel of rear brake pedal 25 35mm
The fastening torque for nut of adjusting stud 18N m
:
-
:
.
26
2
3
1
4