This model designed to have the interlock switch
for ignition and starting circuits and also the
function for side stand engine cut The engine
could be started under conditions below only
Engine located at the neutral gear “N”, and the
ignition and engine cut at the position “ on.
Engine located at the non neutral gear and the
ignition and engine cut at the position “ on,
pick up the side stand and firmly grasp the clutch
lever.
,
.
:
”
-
,
”
!
Danger
!
Caution
Front brake lever
Firmly grasp this brake lever then the front
wheel braked while the rear braking light is on
,
,
.
21
When press the button “
, the high beam goes on, while its indicator “
on instrument
also on and its recovered origin after loosened
The alarm light “
When press the button , all the turning signals and their indicator lights on instrument flash.
Use the alarm light for warning other vehicles when your motorcycle fell in accident or emergency parking
Engine cut
When pressed the engine cut to “ , the engine power circuit cut off, and the engine failed starting.
When pressed the engine cut to “ , the engine power circuit connected, and the engine could be
normally started.
When the engine is working press the engine cut to position “ , the engine stopped immediately.
Engine cut is the easiest and fastest way for stopping the engine
”
,
.
”.
”
.
”
”
,
”
.
PASS”
“
Overtaking light button
“
”
PASS
In case press the engine cut to position “
during driving, it may lead to rear wheel locking up
and accident
Operate the engine cut during driving is not allowed
Electrical starting button “
, when pressed it
down, the engine circuit connected and started.
”
-
.
.
”