Vodavi STARPLUS 2800 Series, User Manual

Page: 8 / 20

4 Installation
Wall Mount (
optional
)
If desired, any 2800 telephone can be converted to a wall mount unit. For
easier mounting, the
optional Wall Mount kit comes with a 9-in. line cord.
To install wall mount:
1. Detach one (1) of two
plastic tabs located
on the Wall Mount.
2. Remove the handset
from the cradle; insert
the tab into the slot
below the hookswitch
as shown …
⇒
3. Unplug existing line
cord from telephone
and wall jack.
4. Run the line cord
provided through the
rectangular opening
of the Wall Mount and plug it into the line jack of the telephone.
5. Insert the “bottom” Wall Mount prongs into the slots on the
“bottom” of the telephone base.
6. Gently press down on the Wall Mount until the prongs on the “top”
snap into the slots on the “top” of the telephone base.
7. Plug the other end of the line cord into the wall jack.
8. Match the two “keyhole” slots on the Wall Mount with the lugs on
the 630-A type jack, and slide the telephone into place.
9. Return the handset to the cradle; the telephone is ready to use.
Connections & Wiring
A-Lead
An A-Lead Connection is
available on the 2801 & 2802
models. The connection is
made via the LINE1 jack
outer pairs as shown …
⇒
Wall Mount Tab
↓ ↓
TO P
Handset Cradle
Tab will hold handset securely when
telephone is used as wall mount.
PI NS 1 2 3 4 5 6