9
Device Function, Port, and LED Description
1. VOL: Increase or decrease the volume level of the amplifier.
2. TREBLE: Adjust the level of high frequency sounds in the music.
3. BASS: Adjust the level of low frequency sounds in the music.
4. DC15V IN: Connect the included voltage adapter to recharge the battery.
5. CHG: LED Will light up when the unit is plugged in and charging.
6. MIC: Connect your wired microphone using a 6.3mm cable.
7. ECHO: Adjust the amount of echo effect on the microphones.
8. MIC VOL: Adjust the microphone volume.
9. USB PORT: Read multimedia files stored on a USB storage device (32GB Max.).
10. MICRO SD: Read multimedia files stored on a Micro SD (32GB Max.).
11. AUX OUTPUT: Connect to another device using a 3.5mm audio cable.
12. FACTORY SERVICE: This connection is intended to be used by service personnel only.
13. PREV: Press to go to the previous track in USB/Micro SD mode. Also scrolls up through the menus.
14. NEXT: Press to go to the next track in USB/Micro SD mode. Also scrolls down through the menus.
15. LEFT: Press to skip backwards in the track ~4 seconds in USB/Micro SD mode. Also scrolls left through the menus.
16. RIGHT: Press to skip ahead in the track ~4 seconds in USB/Micro SD mode. Also scrolls right through the menus.
17. ENTER: Press to play/pause the song in USB/Micro SD mode. Press to select the highlighted option in the menus.
18. RETURN: Allows you to return to the last selected menu.
19. MEDIA: Press to access files on a USB or SD storage device.
20. MIC PRIORITY: Activate or deactivate microphone priority in audio. While active it will decrease the music volume
when you speak into the microphone.
21. TRACK: Select between mono left, mono right, or stereo audio output.
22. POWER: Hold down to power the unit on and off.
USB / MICRO SD
Insert a USB / Micro SD memory to the indicated port, You can start playback when you insert the memory with music
or stored videos.
Play / Pause button:
Press to start or pause playback.
Previous Track button & Next track:
While playing files in USB / Micro USB mode, perform a short press to
select the previous or next track.
Note:
When entering your USB / micro SD device the files that are contained in this will play automatically if you have
several files like music, videos or photos, it will play initially in the video files.
AUX OUT
Use an audio cable to the connect from the AUX OUT to the input of your audio device. The amplifier will automatically
switch to the auxiliary function and the audio will be sent to your device instead of coming out of the built in speakers.
Note:
Keep in mind that in this function it will only be possible to control the output volume from the WiFi-Oke, any
other functions will be controlled from your connected audio device.
