VocoPro UHF-3205 Owner'S Manual Download

Page: 9 / 16

1. Connect the AC POWER ADAPTER to the UHF-3205 receiver’s POWER INPUT connector, then plug the ADAPTER

into a compatible AC electrical outlet.

2. Attach the antennas by screwing in until secure. Be sure the antennas are pointing as straight up as possible.

3. Connect the UHF-3205’s receiver to a sound system, mixer or amplifier’s microphone input(s) with ¼” output

jacks.

NOTE:

There are two options when connecting the UHF-3205 to a mixer or amplifier.

1. Independent Mic Channels

a. Connect each mic channel independently to separate input channels on a mixer or amp. Do this by

connecting a 1/4” cable from each mic channel (CH. A OUT and CH. B OUT) to individual inputs on your

mixer or amp.

2. Mixed Mic Channels

b. Use the mixed output to connect both microphone channels to a single mixer or amp channel. Do this by

connecting a 1/4” cable from the MIX OUT jack to an input jack on your mixer or amp.

Getting connected

Connecting

LEVEL

V.CANCEL

V.PARTNER

POWER

VOCAL CANCEL/PARTNER

TAPE REC.

LOW

HIGH

DSP

REVERB

DSP ECHO

SONIC

ENHANCER

��

��

CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

CAUTION: TO PREVENT ELECTRIC SHOCK,

DO NOT REMOVE COVER SCREWS

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

PERSONNEL

��

www.vocopro.com

��

��

Summary of Contents for UHF-3205

















Search results

Summary of Contents for UHF-3205

Reviews:

Related manuals for UHF-3205

Brands by name

Popular brands

VocoPro UHF-3205, Owner'S Manual

Search results

Summary of Contents for UHF-3205

Reviews:

Related manuals for UHF-3205

Brands by name

Popular brands