PARTS AND FUNCTIONS
(Master Control Module)
6
and expandability module...
2
7
8
9
10
11
3
12
5
13
1
14
15
4
Digital Key Control & Multiplex: The digital key control feature
works in the Master 2 mode. Press the Master 2/Key Control button
on the desired channel (to the down position) then adjust the key
control up or down to raise or lower the “key” of the music.
The Multiplex feature works only with discs recorded in the
“multiplex” format. It will delete the vocal tract on multiplex CD’s
or tapes.
4.
3.
2. Power On/Off
LED Level Meter: Displays sound or cue levels
from the music sources.
1. DC 12V Lamp Connector
7.
Delay: Adjusts the length of each interval. The amount of delay for
each mic channel is controlled by the Echo control.
10.
12. Cue Level: This sets the level within the headphones.
Echo On/Off Switch: The digital “effects” (echo, repeat and delay)
can be set to the desired levels and switched off when not in use by
pressing the switch to the down position.
Master Fader: This raises or lowers the volume for the Master
output jack.
Monitor Fader: This raises or lowers the volume for the Monitor
output jacks.
15.
Headphone Jack
8. Repeat: Adjusts the interval repetition of the echo effect. The amount
of repeat for each mic channel is controlled by the Echo control.
9.
Echo: Adjusts the echo parameter (1-10) for the overall amount of
digital effect on the mic channels. The amount of echo for each mic
channel is controlled by the Echo control.
11. Master/Cue Headphone Switch: Switches the LED level meter
between the entire mix or “cue” signals from individual channels.
14.
13.
Graphic Equalizer: Use this section to raise or lower frequencies
between 64Hz and 16kHz.
5.
Graphic Equalizer On/Off: This turns the EQ on or off.
6.
6
Monitor
