VocoPro KJ-7808RV Owner'S Manual Download Page 6

4

Safety Instructions

CAUTION

RISK OF SHOCK

CAUTION:  To  reduce  the  risk  of   electric  shock,  do 
not  remove  cover  (or  back).  No  user-serviceable 
parts inside. Only refer servicing to qualified service 
personnel.

WARNING

To  reduce  the  risk  of   fire  or  electric  shock, 
do not expose this unit to rain or moisture. 

 

Explanation of Graphical Symbols

The  lightning  flash  &  arrowhead  symbol, 
within  an  equilateral  triangle,  is  intended 
to alert you to the presence of  danger.

The exclamation point within an equilateral 
triangle  is  intended  to  alert  you  to  the 
presence  of   important  operating  and 
servicing instructions.   

Read  Instructions

–  All  the  safety  and  operating  instruc-

tions should be read before the appliance is operated.

Retain  Instructions

–  The  safety  and  operating  instruc-

tions should be retained for future reference.

Heed  Warnings

–  All  warnings  on  the  appliance  and  in 

the operating instructions should be adhered to.

Follow  Instructions

–  All  operating  and  use  instructions 

should be followed. 

Attachments

–  Do  not  use  attachments  not  recom-

mended by the product manufacturer as they may cause 
hazards.

Water and Moisture

– Do not use this unit near water. For 

example,  near  a  bathtub  or  in  a  wet  basement  and  the 
like.

Carts  and  Stands

–  The  appliance  should  be  used  only  

with a cart or stand that is recommended by the manu-
facturer.

7A.

  An  appliance  and  cart  combination 

should  be  moved  with  care.  Quick  stops, 
excessive  force,  and  uneven  surfaces  may 
cause an overturn.

Ventilation

–  The  appliance  should  be 

situated so its location does not interfere with its proper 

ventilation.  For    example,  the  appliance  should  not  be 
situated on a bed, sofa, rug, or similar surface that may 
block the ventilation slots.

Heat

– The appliance should be situated away from heat 

sources  such  as  radiators,  heat  registers,  stoves,  or 
other  appliances  (including  amplifiers)  that  produce 
heat.

Power Sources

– The appliance should be connected to a 

power supply only of  the type described in the operating 
instructions or as marked on the appliance.
                                                                                          

Grounding or Polarization

– Precautions should be taken 

so  that  the  grounding  or  polarization  means  of   an 
appliance is not defeated.

Power-Cord  Protection

–  Power-supply  cords  should  be 

routed  so  that  they  are  not  likely  to  be  walked  on  or 
pinched  by  items  placed  upon  or  against  them,  paying 
particular attention to cords at plugs, convenience recep-

tacles, and the point where they exit from the appliance.

Cleaning

–  Unplug  this  unit  from  the  wall  outlet  before 

cleaning. Do not use liquid cleaners or aerosol cleaners. 
Use a damp cloth for cleaning.

Power  lines

–  An  outdoor  antenna  should  be  located 

away from power lines.

Nonuse  Periods

–  The  power  cord  of   the  appliance 

should  be  unplugged  from  the  outlet  when  left  unused 
for a long period of  time.

Object  and  Liquid  Entry

–  Care  should  be  taken  so  that 

objects  do  not  fall  and  liquids  are  not  spilled  into  the 
enclosure through openings.

Damage  Requiring  Service

–  The  appliance  should  be 

serviced by qualified service personnel when:

A. The power supply cord or plug has been damaged; or 
B. Objects have fallen into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally 
     or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure 
     damaged.

Servicing

–  The  user  should  not  attempt  to  service  the 

appliance beyond that described in the operating instruc-

tions. All other servicing should be referred to qualified 
service personnel.

Note:

 

To  CATV  system  installer’s  (U.S.A.):  This  reminder  is 
provided to call the CATV system installer’s attention to 
Article  820-40  of   the  NEC  that  provides  guidelines  for 
proper  grounding  and,  in  particular,  specifies  that  the 
cable ground shall be connected as close to the point of  
cable entry as practical.

1. 

2.

3.

4.

5.

6.

7.

8.

 

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

Summary of Contents for KJ-7808RV





























Reviews: