9
Getting Connected
Connecting Directly to a Powered Subwoofer
The DVG-777K III can be connected directly to a powered subwoofer
with an RCA input.
What you will need:
• 1 RCA cable
• A powered subwoofer with an RCA audio input
1. Connect one end of the RCA cable to the SW output on the rear
panel of the DVG-777K III
2. Connect the other end of the RCA cable to the RCA input on the
powered subwoofer
Optical
Use the Optical output for connecting digital audio to a device with
an optical input.
What you will need:
• 1 Digital Optical cable
• An audio input device with a Digital Optical audio input jack such
as a digital receiver or mixer
1. Connect one end of the Optical cable to the OPTICAL output jack
on the rear panel of the DVG-777K III
2. Connect the other end of the Optical cable to an Optical input
jack on a receiver, mixer, etc.
NOTE: There is no microphone output in digital audio signal.
NOTE: Digital audio must be set up. Refer to the audio setup page
in the setup menu.
�����
�������� �������
���������
���������
R
L
+
+
-
-
����
�����
�����������
+
�����
������������
�������������
����������
���������
����������
��������
��������
�������
�������������
����������
������
����������
���������
����������
������
