15
To create a playlist in the following order:
1. Track 14
2. Track 7
3. Track 3
4. Track 1
1. Press the PROGRAM button to enter Program mode
2. Press 14 and then ENTER
3. Press 7 and then ENTER
4. Press 3 and then ENTER
5. Press 1 and then ENTER
6. Press PLAY to begin playing in this order
7. Press STOP twice to exit the programmed playlist
Clearing a track in Program Mode
Press the CLEAR button on the screen control to erase the last programmed track.
Using Digital Key Control
Digital Key Control allows you to change the musical key of disc music to fi t any singer’s vocal range. The Digital
Key Control buttons are located on the remote control and front panel
b - Lowers the musical key
# - Raises the musical key
Setting Repeat Options
Press the REPEAT button on the remote control to cycle through the available Repeat options
• REP-ONE: Repeats the same song continuously
• REP-ALL: Repeats the entire disc after it has played through
• REPEAT OFF: All Repeat options are off
• CHAPTER REPEAT (DVD only): Repeats the current chapter on a DVD disc
• TITLE REPEAT (DVD only): Repeats the current title on a DVD disc
Switching Between PAL and NTSC Video Modes
The DVG-777K III is defaulted to NTSC. Use the P/N button on the remote control to switch between PAL and
NTSC.
1. If there is a disc in the DVG-777K III make, sure it is stopped
2. Press the P/N button on the remote control
3. Press ENTER on the remote control. The video mode will change
PAL: Europe and Asia
NTSC: North America
General Operations
