Using the Digital Echo (microphone only)
Turning on Echo:
1. Press the
ECHO
button on the front panel IN to turn Echo on.
2. Press the
ECHO
button
OUT
to turn Echo off.
Adjusting the Echo settings:
The
DA-1055 PRO
allows you to adjust the Repeat and Delay of the Echo effect.
Repeat: The interval time between each repeat. Turning this up (clockwise) increases the time between each repeat and
turning this down (counter-clockwise) decreases the time between each repeat.
Delay:
The length of the overall echo. Turning this up (clockwise) causes the echo to last longer and turning this down
(counter-clockwise) shortens the overall time of the echo.
7-Band Equalizer Operations
Adjusting the 7-Band EQ
The Dual 7-Band Equalizers allow you to adjust the music tone independently for the left and right channels. Every room is
different and requires unique
EQ
settings to produce an optimum sound. Adjust the
EQ
until you find the desired tone for
the source music.
The following is a general idea of how to use each of the bands however there is no “correct” setting as each performance
situation is unique.
64 Hz
- Fattens up the sub/bass tones or bass “rumble”. Generally this is only necessary when using a subwoofer
and the low end is more prominent in the mix.
160 Hz
- Controls the mid-range of the bass/low end.
400 Hz
- Controls the mid to low frequencies.
1 K
- Controls the vocal presence, guitars and anything else in the middle frequency range.
2.5 K
- Controls the more percussive, higher pitched sounds such as snare drums as well as the higher aspects of
the vocal signal.
6.4 K
- Controls the harmonic values of an instrument and is also useful for defining reverb when present.
16 K
- Controls the highest frequency that is audible to the ears and affects the “shininess” in the mix.
NOTE:
The 7-Band Equalizers do not affect microphone output.
NOTE:
Use the
LINE OUT RCA
jacks to output the equalizer channels independently from the microphone channels.
Operations Cont.
8
