11
Descriptions and Functions
�
�
� ��
��
��
�
�
�
�
� �
CONTROLLER FRONT PANEL
1. OPEN/CLOSE
— Press it to open and close the disc tray. The main unit also includes OPEN/CLOSE buttons. The disc
tray cannot be opened during playback, so stop playback before pressing the button.
2. SEARCH
— Press this button to enable frame search using the JOG DIAL while in playback mode.
3. LCD DISPLAY
— Displays graphical information about playback settings and disc/song time.
3. LCD DISPLAY
3. LCD DISPLAY
4. REPEAT button
— Switches between the playback repeat functions, REPEAT ALL and REPEAT ONE.
REPEAT ALL - Repeats the entire disc after it plays all the way through.
REPEAT ONE - Repeats a single song continuously.
4. SINGLE
— Press this button to switch between the single and continuous play modes.
STANDARD mode: Plays all tracks on a disc, then stops when all tracks have been played.
SINGLE mode: Playback will stop after a single song is finished.
4. TIME
— Switches between three settings:
- Elapsed playing time.
- Remaining time in the current song.
- Total remaining time of the disc.
5. PITCH +/–
— The CD slows down, lowering the pitch while the ( - ) button is pressed. Release the button to return to
the original BPM. The CD speeds up, raising the pitch while the ( + ) button is pressed. Release the button to return
to the original BPM. The Pitch button enables the use of the pitch slider.
6. PITCH SLIDER
— Use the slider to adjust the CD pitch. Slide up to decrease the pitch or down to increase the pitch.
The Pitch button enables and disables the pitch slider. Allows up to ± 12% pitch adjustment.
7. JOG DIAL
— When the dial is turned while the CD is paused, the point at which the sound is paused moves by a
number of frames corresponding to the number of clicks. Clockwise moves the point forward and counter-clockwise
moves the point backward. While in playback mode, the JOG DIAL has two modes:
When search mode is on: The JOG DIAL will search frames.
When search mode is off: The JOG DIAL will change the BPM momentarily. Clockwise increases the BPM and
counter-clockwise decreases it.
8. CUE
— Press the CUE button during playback to return to the position at which playback started.
9. PLAY/PAUSE
— Use this button to start playback. Press once to start playback, once again to set the pause mode,
and once more to resume playback.
10. TRACK |<< and >>|
— Use these buttons to skip to the next track ( >>| ) or jump back to a previous track ( |<< ).
Press the 10+ button to skip ahead 10 tracks.
11. LOOP
— Press the IN button to set the loop start point, press the OUT button to set the loop end point. Press the
RELOOP button to jump to the loop start point.
12. PROGRAM
— Press the PROGRAM button and the player will enter program mode. See the operations section for
instructions on setting a custom track order.
