Pairing an SRX Headset with a
Pairing an SRX Headset with a
Pairing an SRX Headset with a
Pairing an SRX Headset with a
Device Using Bluetooth
Device Using Bluetooth
Device Using Bluetooth
Device Using Bluetooth®
®
®
® Wireless
Wireless
Wireless
Wireless
Technology
Technology
Technology
Technology
Notes: A wireless connection must be made between the SRX headset and a device that uses Bluetooth
wireless technology. This wireless connection allows the SRX headset to communicate with only one T5
wearable computer or handheld device. Once a connection has been established, the headset and
device operate as if there is a wire connecting them. This process is called "pairing."
Your headset and device maintain their pairing association with each other after they enter sleep or
power off states, but Vocollect strongly recommends that you pair your headset and device at the
beginning of every shift.
Using an SRX headset
Pairing an SRX headset with T5
Pairing an SRX headset with a handheld device
Disconnecting a pairing
Understanding headset modes and LED patterns
Notes about pairing
Volume control
Using an SRX Headset
At the beginning of a shift:
1. Always begin a shift with a
fully-charged battery
.
2.
Pair your headset
with your device.
3.
Put the headset on
and begin work.
At the end of a shift:
1. To power off the headset, press and hold the Plus and Minus buttons on the headset's earpiece until
the LED indicator turns solid blue (about three seconds).
2.
Remove the headset's battery
and place it into a charger.
Pairing an SRX Headset
Perform pairing when:
you start a shift
you change SRX headsets or devices during a shift
your device does not respond to your commands
the serial number you hear in your headset does not match the serial number of your T5
To pair an SRX headset with a T5 wearable computer, perform the following steps:
1. Make sure the headset is powered off.
Page 1 of 5
SRX Proc Using the SRX Headset
29/8/2007
