SR-10, 20, 30, and 40-Series Headsets
SRX Wireless Headset
Removing a Headset
Wearing an SR-10, 20, 30, and 40-Series Headset
To wear a headset:
1. Put the headset on and adjust the ear pad to fit snugly over your ear. (For the Hard Hat Headset,
first insert the headset bracket into the left or right slot on the hardhat, then put on the hardhat.)
2. Swing the microphone into position with the rotating lever at the earpiece.
3. Make final adjustments with the flexible boom so that the microphone is positioned at the corner of
your mouth, about 1/4" away from your face.
Note: Make sure that there is a windscreen on the microphone. A windscreen improves
performance.
Note: A dot (or the word "talk") on the microphone faces your mouth when the microphone is
positioned properly.
Wearing and Removing SR
Wearing and Removing SR
Wearing and Removing SR
Wearing and Removing SR----Series
Series
Series
Series
Headsets
Headsets
Headsets
Headsets
Page 1 of 4
Wearing and Removing SR-Series Headsets
29/8/2007
