G-405 Quick User Manual Document: G-40501
------------------------------------------------------------------------------------------------------------------------------------------------
13
4.5 Example for 2x2 video wall settings
After set [Pan] number for each TV, each
TV will show 1/4 portion of the image at
different position to become one image.
PAN setting values are as follows:
TV1: H=1, V=1 TV2: H=2, V=1
TV3: H=1, V=2 TV4: H=2, V=2
This is 1080p 16:9 original test pattern for
video wall adjustment that is fed to 4 TV.
Each TV will receive the same signal as
original one. Left picture shows original
image before video wall setting.
When we set [Zoon] with H=2, V=2 in A/B
module, then G-405 will cut the image into
4 sections from the center lines. Each TV
will show only 1/4 of the same image. Left
picture shows all image is only show Top
Left portion of the image before PAN
assignment (Default PAN H=1, V=1)
If we shift the location of the TV,
then we will find the image in the TV
mismatch and need further position
alignment through [Overlap]
function. Please see next section for
more details.
