manualshive.com logo in svg

VMI VIBER X4, Manual, Page: 51 / 58

Share
Download
VMI VIBER X4 Manual Download Page 51

Vibration Measurement Instruments

Charging

VIBER X4™ uses the latest battery charging technology called QC 3.0. We recommend using the VMI’s 

original charger which is supplied with the VIBER X4™ on delivery. It is also possible to use an AC/DC 

adapter with 5V DC/2A output but this extends the charging time. When the charger is connected to VIBER 

X4™, the charging process starts automatically, regardless of whether the VIBER X4™ is switched on or 

off, and ends when the battery is fully charged.

A charge icon appears at the top of the screen when the charger is connected, regardless of which menu is 

selected. Different shapes and colors of the icon inform different modes, as described below.

             VMI’s original quick charger is connected and charging is in progress with 2.048A charging current.

 Unknown adapter is connected and charging is in progress. Charging current varies between 0.5A 

and 1.5A.

 VMI’s original quick charger is connected and the charging process is complete.

 Unknown adapter is connected and the charging process is complete.

 VMI’s original quick charger is connected and the charging process has been suspended due to input

overvoltage, high battery temperature or system  overvoltage.

 Unknown adapter is connected and the charging process has been suspended due to input overvolt-

age, high battery temperature or system overvoltage.

 VMI’s original quick charger is connected and the charging process has been stopped by the built-in 

timer. It is possible to resume the charging process by reconnecting the charger but the reason the timer has 

stopped charging should be checked.

              Unknown adapter is connected and the charging process has been stopped by the built-in timer. It 

is possible to resume the charging process by reconnecting the charger but the reason the timer has stopped 

charging should be checked.

NOTE

 The enclosure of VIBER X4™ may feel warmer than room temperature while using the quick 

charge. This is normal and is continuously checked by the charging processor. If the temperature rises too 

much, the charging process will stop immediately until the temperature drops to below the normal limits.

51

Summary of Contents for VIBER X4



























































Reviews:

No comments