VMI VIBER X4, Manual, Page: 35 / 58

Vibration Measurement Instruments
Measuring Bearing Condition
The value of the BC measurement is shown at the top. A bar on the right of the
value indicates the measurement stability.
On the lower part of the screen there are details regarding:
• Transducer used
• Frequency range
• Averaging type
During live measurements you can press:
• Change detection F1 Change detection type, RMS, Peak or Peak-Peak.
• Settings F3 Enter the settings menu.
Bearing Condition settings
The following parameters can be set on bearing condition settings:
• Detection RMS, Peak or Peak-Peak
• Frequency range Hz 500-6400, 1000-25000, 2000-25000 or 3000-25000 Hz
• Averaging Disabled, Linear or smart
•
Number of Averages
1, 2, 4, 8, 16, 32
• Set Default F3 Reset settings to default
35