8
EX-WOD4
EX-WOD5
EX-WOD6
EX-WOD8
• RMS: 70W Total
• Peak: 280W Total
• Sensitivity: 89dB
• Frequency: 70Hz - 20kHz
• Impedance: 8 Ohms
• Midrange Driver: 1-½”
• High Frequency Driver: ½”
• Woofer Size: 4”
• Dimensions: 8.85 in. (H) x 5.5
in. (W) x 5.7 in. (D)
• RMS: 80W Total
• Peak: 320W Total
• Sensitivity: 90dB
• Frequency: 55Hz - 20kHz
• Impedance: 8 Ohms
• Midrange Driver: 1-½”
• High Frequency Driver: ½”
• Woofer Size: 5.25”
• Dimensions: 9.10 in. (H) x 7 in.
(W) x 7.15 in. (D)
• RMS: 90W Total
• Peak: 360W Total
• Sensitivity: 92dB
• Frequency: 45Hz - 20kHz
• Impedance: 8 Ohms
• Midrange Driver: 1-½”
• High Frequency Driver: ½”
• Woofer Size: 6.5”
• Dimensions: 11.00 in. (H) x
7.8 in. (W) x 7.60 in. (D)
• RMS: 100W Total
• Peak: 400W Total
• Sensitivity: 94dB
• Frequency: 35Hz - 20kHz
• Impedance: 8 Ohms
• High Frequency Driver: 3”
• Woofer Size: 8”
• Dimensions: 15.50 in. (H) x 10
in. (W) x 8.60 in. (D)
Specifi cations
5
Mounting the Speakers
1. With a pencil, mark the
intended mounting locations,
using the mounting brackets
as a template.
2. Pre-drill a hole directly into the
installation locations. If you
are not installing into a wall
stud, insert wall anchors (not
included) into the mounting
holes.
3. If necessary, pull speaker wire
out from the wall and thread
it through the hole in the
mounting brackets.
4. Position the brackets over the
installation holes and secure
to the wall using #10 screws
(not included).
6. Pull lightly on the speakers to ensure the screws and brackets
are properly aligned and secured to the mounting surface.
7. After you verify the brackets are secured to the wall, you can
loosen the mounting knobs to adjust the speakers to your desired
angles. Re-tighten the knobs when you reach the desired position.
5. Secure the speaker to the
bracket by positioning the
speaker between the bracket
arms. Align the holes in the
tops and bottoms of the
brackets with the holes in
the tops and bottoms of
the speakers. Secure the
speakers to the brackets
using the mounting knobs.
Tighten them securely.
Installation (continued)
No Stud
Wall
Stud
Drywall
Drywall
