![background image](http://html.mh-extra.com/html/vlt/fc-322/fc-322_design-manual_1042923100.webp)
Ordering information
Frame size D3: 176F4600
Frame size D4: 176F4601
Frame size E2: 176F1852
Kit contents:
•
Ductwork components
•
Mounting hardware
•
16 mm, M5 torx screws for top vent cover
•
10 mm, M5 for attaching drive mounting plate to enclosure
•
M10 nuts to attach drive to mounting plate
•
Gasket material
NB!
Please see the instructions
175R5922 for further information
3.7.3 Installation on Pedestal
This section describes the installation of a pedestal unit available for the
frequency converters frames D1 and D2. This is a 200 mm high pedestal
that allows these frames to be floor mounted. The front of the pedestal
has openings for input air to the power components.
The frequency converter gland plate must be installed to provide ade-
quate cooling air to the control components of the frequency converter
via the door fan and to maintain the IP21/NEMA 1 or IP54/NEMA 12 de-
grees of enclosure protections.
Automation VT Drive FC322 Design Guide
3 VLT Automation VT Drive Selection
MG.20.X1.22 - VLT
®
is a registered Danfoss trademark
99
3
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx