Vlano 100 PRIM, Operating Manual, Page: 8 / 20

DE
VARIANTS OF THE FAN
100 PRIM (V) T:
the fan is equipped with an overrun switch. The fan starts operation when an external switch
(eg a light switch) is actuated and a supply voltage is input to the terminal LT.
After disconnecting the supply voltage, the fan continues to operate for the set run-on time, which is set via
the DIP switch.
VT Models are equipped with a cord switch.
100 PRIM TP:
the fan is equipped with a motion sensor and an overrun switch. The fan works in one of the
four operating modes that are set using the DIP switch.
100 PRIM (V) TH:
the fan is equipped with a humidity sensor and overrun switch. The fan works in one of the
four operating modes that are set using the DIP switch. VT Models are equipped with a cord switch.
OPERATIONAL SETTING OF THE FAN
THE BOARD OF THE TIMER IS POWERED! THE FAN BEFORE EVERYONE
DISCONNECT SETTING WORK FROM THE POWER SUPPLY!
The fan is set to operate by switching the DIP switch. To access the DIP switch, remove the cover and open the
rubber cover (Fig. 13). A plastic screwdriver for switching the DIP switch is included in the scope of delivery.
DO NOT USE METAL SCREWDRIVERS, KNIVES, OR
OTHER SHARP OBJECTS TO DAMAGE THE CONTROL BOARD.
8th