•
•
•
1
JACK/FEMALE XLR INPUTS (BAL/UNBAL)
The system accept jack or XLR input connectors.
•
2
LIMITER LED
The amplifier has a built in limiter circuit to prevent
clipping of the amplifiers or overdriving the
transducers. When the soft clipping circuit is active the
LED blinks orange. It is okay if the limit LED blinks
occasionally. If the LED blinks frequently or lights
continuously, turn down the signal level.
•
3
SIGNAL LED
The signal indicator lights green if there is signal p
•
resent on the main XLR input
•
4
STATUS LED
The status indicator flash if the temperature protection
is active.
•
5
MALE XLR SIGNAL OUTPUT
The output XLR connector provides a loop trough for
speakers daisy chaining.
•
6
VOLUME CONTROL
Adjust the amplifier volume.
•
7
MODE SWITCH
Set the preset equalization. For all other applications
equalisation is recommended.
•
8
INPUT SENSITIVITY SWITCH.
Position the switch in
LINE to use a line level source (0 dB) or MIC to use a
microphone source.
•
9
PowerCON AC SOCKET
The PowerCON AC socket connect the power cord to
the socket.
•
10
POWER MAIN SWITCH
The power switch turns the AC power ON and OFF.
REAR PANEL FEATURES AND CONTROLS
2
1
3
4
5
8
9
10
1
6
9
6
7
