4
VKB Gunfighter Mk.II Quick
Guide - HARDWARE
Accessing the Gunfighter gimbal (e.g., to replace cams or change springs):
1. Disconnect the grip.
2. Unscrew the 5 screws on the dust cover ring.
3. Remove the ring and rubber dust cover.
4. Unscrew the 4 screws on the base plate (if installed); remove the base plate.
5. Disconnect the 4-pin connector from the base PCB.
6. Unscrew the
outer 4
screws*
on the top plate.
7. Remove the gimbal from the base.
8. When done, assemble in reverse order.
*
Note
: The inner 4 screws are fixed in place with locktite and are
not
meant to be removed by the user!
