2
VKB Gunfighter Mk.II Quick
Guide
NOTE
: VKB HQ tightened the frictioner of the dry clutch (aka damper) to prevent it from loosening during shipping.
So before you go flying, you will need to adjust the dry clutches for both pitch and roll axes accordingly, otherwise
you might find that your Gunfighter does not perfectly return to center by itself (see pg. 5).
NOTE
: The Gunfighters ship with cams #10 (soft center detent for both axes), and springs #20 (standard strength)
factory installed (see pg. 6 and 7 if you want to change those).
REFER TO THIS VIDEO IF YOU NEED HELP WITH ACCESSING THE GIMBAL, SWAPPING CAMS
AND SPRINGS
:
https://www.youtube.com/watch?v=_x6RdEJJ_PM
(Even though the video pertains to the Gladiator Pro, the gimbal design (including cams and springs), is
pretty much the same for the Gunfighter)
NOTE
: You need to calibrate your new Gunfighter correctly, especially when bundled with the MCG/MCG PRO
grip due to the additional axes of the MCG grip. (see pg. 11 and 12).
To flash your Gunfighter with new firmware (e.g., you want to install a different grip), start reading from pg. 8.
