8
z
C1
Set master tel No.
Keyword:
Master Msr
Command:
*master=no:password# or *msr=no:password#
Description:
This is the first step to use the device. If the user's number is 13712345678; SIM
card in the device number is 13712345670.
Example:
Sending: *master=13712345678:1234# or
*msr=13712345678:1234#
(default password 1234.)
z
C2 Set slave tel no.
Keyword:
Slave Slv
Command:
*slaveX=no# or *slvX=no#
Description:
Slave numbers is designed for other users of the same car. There are three slave numbers.
Only the master phone number can set the slave number. If others number want to set the slave
number, it will get the failed feedback: The sender must be master number. For example to set
the second slave number.
Example:
Sending:
*slave2=13712345672# or
*slv2=13712345672#
z
C3
Set password
Keyword:
Password Psd
Command:
*password=old:new# or *psd= old:new #
Description:
This password is the key to communicate with device. It should have 4 numbers, default setting
is 1234.
Example:
Sending:
*password=1234:5678# or
*psd= 1234:5678 #
z
C4
Load default
Keyword:
Default Dft
Command:
*default # or *dft#
Description:
When user want to clear all the settings in the device, this command is important. Only master
number can send it.
z
C5
Restart
