7. Flashlight Function
On/Off :
Short press button 1 time.
8. Recording Settings
All recoding settings including time, voice sensitivities, mute time, voice quality, record amplify and record time periods can
revised by editing a record setting file.
8.1 RECORD setting file
Connect device with PC via USB cable. There will be RECORD.txt in the folder.
8.2 Settings
a. Time Settings
Time format: Year-Month-Day Hour-Minute-Second
Change the time to the current time after the equal sign.
b. Voice Sensitivity Settings
The smaller number of the sensitivity rate the higher voice required.
Voice Sensitivity Range: 0-50
Default Rate: 10
c. Mute Time Settings
Device will stop recording after conversation ended for certain minutes.
Mute rate: 0-999 minutes
Default Rate: 3
d. Voice Quality Settings
Rate 1: 32Kbps, 8G memory can store 580 hours audio
Rate 2: 64Kbps, 8G memory can store 290 hours audio
Rate 3: 192kbps, 8G memory can store 96 hours audio
Default Rate: 2
e. Record Amplify Settings
For long distance recording, voice will be enhanced by amplifying record.
Rate 1: Within 1M range
Rate 2: Within 1-3M range
Rate 3: Within 3-5M range
Rate 4: Over 5M range
f. Record time periods settings
The time setting default one week for one cycle. From Sunday to Saturday, you can set the record time periods according to
your request.
The default time period as below:
Sun.=00:00-23:59
Mon.=00:00-23:59
Tues.=00:00-23:59
Wed.=00:00-23:59
Thur.=00:00-23:59
Fri.=00:00-23:59
Sat.=00:00-23:59
Note: the device is on during above time periods. Outside these time periods, the device is off.
If no need record for the whole day, please set it blank after the equal sign.
If need record for the whole day, set it as 00:00-23:59 after the equal sign.
One day can set two time periods maximum. For example: Sun.= 08:00-12:00, 14:00-18:00
8.3 Update Settings
Very important notice: Set Update Setting to Y, system will start update settings after U disk is exited.
System will not start update settings if it is set to N.