VIZU Auto Breader, Manual

Page: 7 / 21

 Unlatch the drop catch on the side of the motor box and slide the motor box over 2
to 3 inches. This disengages the motor.
 Holding the breading compartment the brush can now be slid back in the direction of
the drive side – removing the end of the shaft from the bearing on the breading
compartment.
 The brush can now lifted out.
Once all the parts have been removed they must be washed in warm soapy water to remove
all traces of flour and breading mix.
The machine should NOT be re-assembled until all the parts have been thoroughly dried.
Follow steps 1 – 8 in reverse order.