Viz SDI I/O Module Operating Instructions
`14
2.2.1
CONFIGURE IO CONNECTORS
I/O
C
ONFIGURATION
T
AB
As mentioned above, this dialog is shown on first launch,
but can be accessed later upon existing the
Live Desktop
to make modifications to the configuration. Select either
the
IO Configuration
or
Genlock
tabs, according to your
need.
The
IO Configuration
tab makes it a simple matter to
select presets using graphic representations that depict
the connector layout on the backplane.
Note: Certain selections may require rebooting the system
to re-initialize the SDI hardware.
V
IDEO
S
ETTINGS
T
AB
The second tab in this configuration panel is
labeled
Video Settings
, and its controls are
discussed next.
FIGURE 14
FIGURE 15
