VIZIO VU37L HDTV10A User Manual
Version 3/12/2008
12
www.VIZIO.com
1.5
1.5
1.5
1.5
VIZIO Remote Control
VIZIO Remote Control
VIZIO Remote Control
VIZIO Remote Control
GUIDE
– This button displays program information. Press this button once and the information of the
program being viewed is shown. Press it a second time and the Electronic Programming Guide will
appear in the screen.
POWER
– Press this button to turn the TV on from the Standby mode. Press it again to return to the
Standby mode.
TV
– Press this button to select TV.
AV
– Press this button to select the Audio Video input. Pressing this button repeatedly will get you to the
AV input. Keep in mind that if S-Video cable is being used, then AV will show the signal going through this
input as the S-video takes priority.
COMPONENT
– Press this button to select the Component (YPbPr) input.
Pressing this button repeatedly will take you through the Component
(Component 1 and component 2) inputs.
HDMI
– Press this button to select the HDMI input. Pressing this button
repeatedly will get you through the HDMI (HDMI1, HDMI 2 and HDMI 3)
different inputs
MENU
– Use this button for the On-Screen Display (OSD) menus. When use
within the OSD menus, pressing this key will make the selection of an option.
- These buttons navigate the On-Screen Display (OSD).
MUTE
– This button turns the sound on and off.
LAST
– This button recalls the previously viewed channel when it is used in
TV mode; meaning that the TV unit has control over the signal or program
being watched. This button also has different functions when being used in
conjunction with the On-Screen Display (OSD) menu.
VOL (+ or -)
– These buttons turn the volume up or down.
CH (+ or -)
– These buttons change the channels
up or down.
Number Button Pad
– Use these buttons to select
a channel or enter a password.
INPUT
– This button allows the user to cycle
through the inputs. Repeatedly pressing of this
button will step you through the input sources in the
following sequence: TV, AV1/S-VIDEO, AV2,
Component 1, Component 2, RGB, HDMI 1, HDMI
2 and HDMI 3. Once you have stepped through the
entire sequence, you will return to the beginning.
- (DASH)
– When selecting a digital channel
directly use this button for the separation of main
and sub-channels. For example, channel 28-2
would be selected by the button sequence 2 8 - 2.
