background image

VIZIO VMT40-55M User Manual 

purchaser; or if VIZIO determines that the VIZIO bracket has been improperly installed, altered in any way 
or tampered with; or if it is determined by VIZIO that the damage did not result from the VIZIO product’s 
failure or that in fact no occurrence took place; or the repair or replacement of the damaged Component 
is covered under a manufacturer’s warranty; or VIZIO determines that the Component was not used 
under normal operating conditions or in accordance with any labels or instructions. Improper installation 
voids this Limited Warranty & Insurance. VIZIO’s Limited Warranty & Insurance only protects against 
damage to properly connected and installed Components where VIZIO has determined, in its sole 
discretion, that the damage resulted from a VIZIO bracket’s failure, and does not protect against acts of 
God such as flood, earthquake, war, vandalism, theft, normal-use wear and tear, corrosion, misuse or 
abuse. Any damage caused by failure to observe instructions for installation, or product limitations 
specified in the product manual or product specification sheet, or mounting on unsuitable surfaces will not 
be covered by the VIZIO’s Limited Warranty & Insurance.  

The protections described herein shall be IN LIEU OF any other warranty, express or implied, including 
but not limited to, any warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 

In no event shall VIZIO be liable for incidental, special, direct, indirect consequential or multiple damages 
such as, but not limited to, lost business or profits arising out of the sale, use or inability to sell or use any 
VIZIO products, even if advised of the possibility of damages. This Limited Warranty & Insurance gives 
you specific legal rights, and you may also have other rights, which may vary from state to state. Some 
states do not allow the exclusion of limitation of incidental or consequential damage so the above 
limitations may not apply to you.  

This Limited Warranty & Insurance is valid only for the original purchaser of the product and only if the 
original purchaser registers the purchase on-line at www.VIZIO.com or by mailing a copy of the purchase 
receipt (showing the date of purchase) and product warranty registration card to VIZIO, 39 Tesla, Irvine, 
CA 92618. All damage claims must be made to VIZIO within fifteen (15) days from the date of the 
occurrence and must be accompanied by the purchase receipt for the damaged bracket or this Limited 
Warranty & Insurance is void. This Limited Warranty & Insurance is only valid in USA and Canada. To 
make a warranty or insurance claim, please call (877) MY VIZIO (877-698-4946) within fifteen (15) days 
of the occurrence. Please provide to us or have the following information available:  

a. The date of the occurrence and the part number of the VIZIO bracket involved. 
b. The Component that was used with the VIZIO bracket at the time of the occurrence.  
c. The Component that was damaged during the occurrence and the extent of the damage.  
d. A detailed description of any additional damage from the occurrence.***  
e. A legible copy of the original receipt showing the place and date of purchase of the VIZIO bracket.  
f. A legible copy of the original receipt for the damaged Component. 
g. Photo(s) of any claimed damage. 
h. Serial number located on the carton box and control box. 

*   Failure to perform in accordance with that bracket’s specifications sheet or product manual. 
** Properly installed in accordance with that bracket’s installation instruction sheet or bracket manual and 
only when mounted on approved surfaces. 
***VIZIO reserves the right to require additional supporting evidence to substantiate any additional 
damage claims. 

 

Version 6/23/2009 

15 

 

www.VIZIO.com

 

Summary of Contents for VMT40-55M
















Reviews: