18
5
E470VLE
Adding New Channels
Occasionally, you may need to add a new analog channel or add a new range of
channels. You can do this by using the Partial Channel Search and Add Analog
Channel options.
To add a range of new channels:
1. From the Settings menu, highlight
Partial Channel Search. The Partial
Channel Search menu is displayed.
2. Highlight
Scan Mode and select the type of channel you are adding:
Analog, Digital, or Analog/Digital.
3. Highlight
From Channel and enter the channel from which you want to
begin the scan. (Use the
Number Pad on the remote to enter the channel.)
4. Highlight
To Channel and enter the channel to which you want to end the
scan. (Use the
Number Pad on the remote to enter the channel.)
5. Highlight
Start and press OK. The partial channel search begins.
6. Wait until the partial channel search is 100% complete. Highlight
Done and
press
OK.
7. Press the
EXIT button on the remote.
To add a single new analog channel:
1. From the Settings menu, highlight
Add
Analog Channel. The Add Analog
Channel menu is displayed.
2. Highlight
Enter Channel # and use the
Number Pad on the remote to enter
the number of the channel you are
adding.
3. Highlight
Add Channel and press OK.
The TV scans for the channel.
4. When the TV is done scanning for the
channel, press the
EXIT button on the
remote.
Skipping Channels
After a channel scan is completed, you may find that some channels are too weak
to watch comfortably. There may also be some channels you do not want to view.
You can remove these channels from the TV’s memory with the Skip Channel
feature.
Channels that have been removed with the Skip Channel feature can
still be viewed if the channel is entered using the Number Pad. If
you wish to completely block a channel from being viewed, use the
parental controls. See
Using the Parental Controls on page 19.
To remove a channel:
1. From the Settings menu, highlight
Skip
Channel. The Skip Channel menu is
displayed.
2. For each channel you wish to remove,
use the
Up/Down Arrow buttons on
the remote to highlight the channel and
press
OK. An X appears to the right of
each channel you select.
3. When you have selected all of the
channels you wish to remove, press
the
EXIT button on the remote.
