5
25
Changing the Advanced Network Settings
Advanced users can fine-tune the network settings using the
Manual Setup feature.
To change advanced network settings:
1. From the Network Connection
menu, highlight
Manual Setup
and press
OK
. The Change
Settings menu is displayed.
2. Use the
Arrow
and
OK
buttons
to adjust each setting:
• DHCP
- (Dynamic Host
Configuration Protocol) This
setting must be turned Off
to change any of the other
settings.
• IP Address
- The IP address
assigned to the TV.
• Subnet Mask
- The subnet
mask.
• Default Gateway
- Your network’s default gateway
address.
• Pref. DNS Server
- Your preferred domain name server
address.
• Alt DNS Server
- Your alternate domain name server
address.
3. If you need the RJ45 (ethernet) MAC address or the Wireless
MAC address to set up your network, these are displayed at
the bottom of the Change Settings menu.
4. Press the
EXIT
button on the remote.
Testing Your Network Connection
To test your network connection:
1. From the Network Connection menu, highlight
Test
Connection
and press
OK
.
2. The Test Connection screen displays the connection
method, network name, signal strength, and download
speed of your network connection.
3. Press the
EXIT
button on the remote.
