background image

 

•  Do not apply pressure or throw objects at your TV. 

This may compromise the integrity of the display. The 

manufacturer’s warranty does not cover user abuse or 

improper installations.

•  The power cord must be replaced when using different 

voltage than the voltage specified. For more information, 

contact your dealer.

•  Your TV is equipped with a three-pronged grounded plug 

(a plug with a third grounding pin). This plug will fit only 

into a grounded power outlet. This is a safety feature. If 

your outlet does not accommodate the three-pronged, 

have an electrician install the correct outlet, or use an 

adapter to ground your TV safely. Do not defeat the safety 

purpose of the grounded plug.

•  When connected to a power outlet, power is always 

flowing into your TV. To totally disconnect power, unplug 

the power cord.

•  The lightning flash with arrowhead symbol within an 

equilateral triangle is intended to alert the user to the 

presence of un-isolated, dangerous voltage within the 

inside of your TV that may be of sufficient magnitude to 

constitute a risk of electric shock to persons.

•  Do not overload power strips and extension cords. 

Overloading can result in fire or electric shock. 

•  The wall socket should be installed near your TV and 

easily accessible.

•  Only power of the marked voltage can be used for your 

TV. Any other voltage than the specified voltage may 

cause fire or electric shock.

•  Do not touch the power cord during lightning. To avoid 

electric shock, avoid handling the power cord during 

electrical storms.

•  Unplug your TV during a lightning storm or when it will not 

be used for long period of time. This will protect your TV 

from damage due to power surges.

•  Do not attempt to repair or service your TV yourself. 

with the apparatus. When a cart is used, use 

caution when moving the cart/apparatus 

combination to avoid injury from tip-over.

•  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

•  Refer all servicing to qualified service personnel. Servicing 

is required when the apparatus has been damaged in 

any way, such as when the power-supply cord or plug is 

damaged, liquid has been spilled or objects have fallen 

into the apparatus, the apparatus has been exposed to 

rain or moisture, does not operate normally or has been 

dropped.

•  Unplug the power cord before cleaning your TV. 
•  When moving your TV from an area of low temperature 

to an area of high temperature, condensation may form 

in the housing. Wait before turning on your TV to avoid 

causing fire, electric shock, or component damage. 

•  A distance of at least three feet should be maintained 

between your TV and any heat source, such as a radiator, 

heater, oven, amplifier etc. Do not install your TV close to 

smoke. Operating your TV close to smoke or moisture may 

cause fire or electric shock.

•  Slots and openings in the back and bottom of the 

cabinet are provided for ventilation. To ensure reliable 

operation of your TV and to protect it from overheating, 

be sure these openings are not blocked or covered. Do 

not place your TV in a bookcase or cabinet unless proper 

ventilation is provided.

•  Never push any object into the slots and openings on 

your TV cabinet. Do not place any objects on the top of 

your TV. Doing so could short circuit parts causing a fire 

or electric shock. Never spill liquids on your TV.

•  Your TV should be operated only from the type of power 

source indicated on the label. If you are not sure of the 

type of power supplied to your home, consult your dealer 

or local power company.

   

Summary of Contents for E370VLE


















































Reviews:

Related manuals for E370VLE