7
If the TV is connected to an external antenna, select
Antenna
, then press
Right Arrow
and go to step 7.
If the TV is connected to a cable service without a set-top box (cable is
connected directly from the wall outlet) select
Cable
, then press
Right Arrow
and go to step 7.
If the TV is connected to a cable or satellite set-top box, press the
EXIT
button
on the remote, then select the input to which your set-top box is connected
(HDMI, COMP, or AV).
8
Press the
Up/Down Arrow
buttons on the remote to highlight
Scan
.
Press
Right Arrow
to begin the channel scan.
Wait for the channel scan to finish.
When the channel scan is complete, the first-time setup is
complete.
Initial Setup
Please select your input source:
Next
Back
Select
Antenna
Cable
Tuner
Exit
EXIT
Initial Setup
Please connect your cable or
antenna to the DTV/TV input
Scan
Skip Scan
Channel Scan
Next
Exit
EXIT
Back
Select
