VIVOTEK
66 - User's Manual
Custom Command
If
Custom Camera (scanner)
is selected as the PTZ driver,
the
Preset Position
and
PTZ Control
Panel
on the main page will be disabled. You will need to
configure command buttons to control the PTZ
scanner. Click
Custom Command
to open the Custom Command page to set the commands in the
Control Settings session. Please refer to your PTZ scanner user's manual to enter the commands in the
following fields.
Click
Save
to enable the settings and click
Close
to exit the page.
►
The command buttons will be displayed on the main page:
NOTE
►If you select
DynaDome/SmartDOME, Lilin
PIH-7x00, Pelco D, Pelco P, or Samsung
protocol as the PTZ driver, the Control
Settings column will not be displayed.
►For all PTZ drivers, a total of five additional
command buttons can be configured.
Summary of Contents for VS8102
Page 1: ...Rev 1 3...
