VIVOTEK
280 - User's Manual
cameraid
0~255
1/4
Camera ID controlling external PTZ camera.
isptz
0 ~ 2
1/4
0: disable PTZ commands.
1: enable PTZ commands with PTZ driver.
2: enable PTZ commands with UART tunnel.
* Only available when bit7 of
capability_ptzenabled is 1
disablemdonptz
<boolean>
1/4
Disable motion detection on PTZ operation.
7.39 camera PTZ control (SD series)
Group:
camctrl_c<0~(n-1)>
for n channel products
(the bit7 of capability_ptzenabled is 0 and the bit4 of
capability_ptzenabled is 1)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
ccdtype
string[16]
6/7
(Internal used, read only)
motortype
string[16]
6/7
(Internal used, read only)
cameraid
1 ~ 255
1/4
Camera ID controlling external PTZ
camera.
Note:
Please set your speed dome to the
appropriate baud rate, and Camera ID,
e.g. 2400bps, camera ID 1,2,3,,,,etc.
All Camera IDs on the same controlling
system (NVR or rs485 keyboard) have
to be distinct.
Therefore, once you send a controlling
signal, each camera will only accept the
inputs with the corresponding ID.
panspeed
-5 ~ 5
1/4
Pan speed
tiltspeed
-5 ~ 5
1/4
Tilt speed
zoomspeed
-5 ~ 5
1/4
Zoom speed
autospeed
-5 ~ 5
1/4
Auto pan speed
focusspeed
-5 ~ 5
1/4
Auto focus speed
preset_i<0~(k-1)>_name string[40]
1/4
Name of the preset location.
preset_i<0~(k-1)>_pan capability_ptz_c<0~(n-1)
>_minpan ~
capability_ptz_c<0~(n-1)
>_maxpan
1/4
Pan position at each preset location.
preset_i<0~(k-1)>_tilt
capability_ptz_c<0~(n-1)
1/4
Tilt position at each preset location.
