VIVOTEK
User's Manual - 309
© 2020 VIVOTEK INC. All Right Reserved
177
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
maxfps_h264
A list of <Positive
Integer> and "-"
0/7
Maximum fps which the device can
encoded with H.264 on resolutions in this
video mode.
"-" means not support.
* One to one mapping to the resolution
in "resolution".
* The element number is defined as
"nresolution" in this group.
* This parameter records the frame rate
when
"videoin_c<0~(n-1)>_cmosfreq"=60 or
"videoin_c<0~(n-1)>_modulation"=ntsc
* Only available when 'h264' is listed in
"capability_videoin_codec".
maxfps_h265
A list of <Positive
Integer> and "-"
0/7
Maximum fps which the device can
encoded with H.265 on resolutions in this
video mode.
"-" means not support.
* One to one mapping to the resolution
in "resolution".
* The element number is defined as
"nresolution" in this group.
* This parameter records the frame rate
when
"videoin_c<0~(n-1)>_cmosfreq"=60 or
"videoin_c<0~(n-1)>_modulation"=ntsc
* Only available when 'h265' is listed in
"capability_videoin_codec".
description
<string[128]>
0/7
Description about this mode.
7.27.9
Capability for Image
Group:
capability_image_c<0~(n-1)>
n denotes the value of "capability_nvideoin"
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
basicsetting
0, <positive
integer>
0/7
A 32-bits integer, each bit can be set
separately as follows:
© 2020 VIVOTEK INC. All Right Reserved
178
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
Bit 0 => Supports Brightness or not.
Bit 1 => Supports Contrast or not.
Bit 2 => Supports Saturation or not.
Bit 3 => Supports Sharpness or not.
Bit 4 => Supports adjusting the image
to proper position horizontally or not.
Bit 5 => Supports adjusting the image
to proper position vertically or not.
hlm
<boolean>
0/7
Hightlight Mask: The function will
strengthen the image contrast and
mask the specified zone of image if
any strong spot-light exists.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0311a.
wdrpro_mode
0, 1, 2
0/7
0: Non-support WDR Pro
1: Support WDR Pro
2: Support WDR Pro and WDR Pro II
wdrpro_strength
0, 1
0/7
0: Non-support tuning strength of
WDR Pro
1: Support tuning strength of WDR Pro
* If
"capability_image_c<0~(n-1)>_wdrpro
"=1, this may be either 0 or 1.
wdrpro_supportlevel 0, <positive
integer>
0/7
This contains a list of positive integers,
split by comma.
If "wdrpro_mode" =1, then the value
indicate the support strength level of
WDR Pro.
If "wdrpro_mode" =2, then the first
number indicate the support strength
level of WDR Pro, and the scecond
number indicate the support strength
level of WDR Pro II.
wdrpro_affect
-,
exposurewin.mode
0/7
When WDR Pro is enabled, some
features may become malfunction or
