Vivotek ND8322P User Manual Download

Page: 90 / 198

VIVOTEK - Built with Reliability

90 - User's Manual

3. If you are creating a regular user with limited access to cameras, deselect the checkboxes by

the cameras to deny the user access.

4. Click

Apply

to close the configuration window. Repeat the process to create more users.

3-4-17. Settings - Storage

The storage page displays the volume information including physcial position, total capacity,

used and free space, and associated commands such as Format and Delete. Since each

volume contains only 1 hard drive, details information about the hard drive is also displayed on

this page.
You can format an existing storage volume in situations such as when you need to re-deploy the

system elsewhere.

Disk Information:

Model family

: The brand name of the HDD manufacturer.

Device model

: The disk model name.

Serial number

: Serial number assigned to the disk drive.

Firmware version

: The version of firmware running on this disk drive.

Last check

: The bad block check or S.M.A.R.T. test previously executed on this drive.

Status

: S.M.A.R.T. status polled from the disk drive. This is not the results from a manually-

executed S.M.A.R.T. test.

Summary of Contents for ND8322P







































































































































































































Search results

Summary of Contents for ND8322P

Reviews:

Related manuals for ND8322P

Brands by name

Popular brands

Vivotek ND8322P, User Manual

Search results

Summary of Contents for ND8322P

Reviews:

Related manuals for ND8322P

Brands by name

Popular brands