Vivotek ND8322P User Manual Download

Page: 154 / 198

VIVOTEK - Built with Reliability

154 - User's Manual

To create a storage volume:

1. Click on the

Create...

button. Also check that if all your disk drives are listed. If properly

installed, they should all be listed in the Storage - Volume window.

Selected

(#) numbered

: Volume index.

Disk

Member(s) of this volume.

Capacity

Total usable capacity size in Gigabytes.

Used

The used capacity in Gigabytes.

Status

The status display when processing volume configuration, deleting, and
formatting a volume.

Error: Configuration or hard drive errors. The volume is invalid, and may need to

be manually removed.

The legends used in the Volume list are described below:

You can click to select a volume and its current status will be displayed as shown below. The

information will include its physical position, capacity, used capacity, and free capacity.

Summary of Contents for ND8322P







































































































































































































Search results

Summary of Contents for ND8322P

Reviews:

Related manuals for ND8322P

Brands by name

Popular brands

Vivotek ND8322P, User Manual

Search results

Summary of Contents for ND8322P

Reviews:

Related manuals for ND8322P

Brands by name

Popular brands